Calculus IIIFree · No sign-up

Volume by Triple Integral Calculator

This volume by triple integral calculator finds the volume of a solid from two surfaces, from a shape preset or from triple limits. It finds where the surfaces meet, applies the Jacobian for you, and shows the exact volume with steps, units and a 3D solid. A triple integral with integrand 1 adds up every small box of the solid, so ∭ 1 dV is its volume; students and engineers use it for Calculus III problems, tank and part volumes, and checks of textbook formulas.

See the solid
  • Volume between two surfaces
  • 9 shape presets with formula check
  • m³, L, ft³, in³ and US gal
3
ways to describe a solid
3
coordinate systems
9
shape presets
Volume engine
topz = f(x, y)
bottomz = g(x, y)
Region D under the solid

Auto finds where the top surface meets the bottom one and uses everything in between.

Preview
—Full solution ↓

Results

Your solid, in 3D with its volume

The 3D view draws the solid from your input, and the inset shows its shadow D on the xy-plane. A wrong limit shows up as a wrong shape before you trust the number.

Interactive diagram

3D solid

Region D (xy-plane)
Drag to rotate · scroll to zoom

Volume

=

Step-by-step solution

—

    Step by step

    How to Use the Volume by Triple Integral Calculator

    To use the volume by triple integral calculator, follow these 6 steps. The preview, the volume and the 3D solid update as you type.

    1. 1

      Choose how to describe the solid

      Two surfaces for a solid between z = f and z = g, Shape presets for textbook solids, Triple limits for full control.

    2. 2

      Enter the top and bottom surfaces

      For example top 8 - x^2 - y^2 and bottom x^2 + y^2.

    3. 3

      Pick the region D

      Auto finds where the surfaces meet. A disk, a rectangle or y between two curves cuts the solid off yourself.

    4. 4

      Set a length unit (optional)

      With cm, the answer reads in cm³ and converts to mL, L, in³ and more.

    5. 5

      Find the volume

      Press Find the volume or Enter. Results refresh on their own while you type.

    6. 6

      Check the solid and the steps

      Rotate the 3D solid, compare the region D, and read each integral in the steps.

    Try an example:

    The idea

    How a Triple Integral Gives Volume (Integrand = 1)

    A triple integral gives volume when the integrand is 1, since the integral then adds up the volume dV of every small box inside the solid and nothing else. A triple integral is a continuous sum over the 3 dimensions of space: with f = 1, each box contributes 1 × ΔV, and the total is the volume V of the solid E.

    The picture is a Riemann sum in 3D. Fill the solid with small boxes, keep the boxes whose centres lie inside, and count them. As the boxes shrink, the count times the box volume approaches the exact volume.

    With a different integrand, the same triple integral measures something else over the solid: a density δ gives the mass, and x · δ gives the moment used for the centre of mass. Volume is the case δ = 1.

    Cube-count explorer: the tetrahedron x + y + z ≤ 1 filled with small boxes (drag to rotate)
    boxes inside—
    Σ 1 · ΔV—
    exact ∭ 1 dV1/6 ≈ 0.1667
    error—

    Each box has volume (1/n)³. A box counts when its centre satisfies x + y + z ≤ 1. The sum stays a little below 1/6 and closes in on it as n grows: 35 boxes give 0.1620 at n = 6, and 165 boxes give 0.1650 at n = 10.

    Formula

    Volume Formula: V = ∭_E 1 dV

    The volume formula is V = ∭E 1 dV, where E is the solid and dV is the volume element of the coordinate system: dx dy dz, r dz dr dθ or ρ² sin φ dρ dφ dθ.

    The volume formula in 3 coordinate systems
    SystemVolume element dVV as an iterated integral
    Cartesiandx dy dz
    Cylindricalr dz dr dθ
    Sphericalρ² sin φ dρ dφ dθ

    The extra factors r and ρ² sin φ are Jacobian determinants, the absolute value of the stretching that a change of variables applies to a small box. The calculator adds them on its own: in cylindrical or spherical mode, you enter only the limits.

    By Fubini's theorem, a continuous integrand over a well-described solid gives the same value in all 6 orders of integration, such as dz dy dx or dx dz dy. Pick the order that makes the limits simplest; the change order of integration calculator rewrites the limits for a new order.

    The volume element dV in 3 coordinate systems (drag to rotate)
    volume element—

    The cylindrical wedge has an arc side of length r dθ, so the farther it sits from the z-axis, the larger it is. The spherical wedge has sides dρ, ρ dφ and ρ sin φ dθ, which multiply to ρ² sin φ.

    Method

    How to Find Volume With a Triple Integral in 5 Steps

    To find volume with a triple integral, sketch the solid, choose the coordinates, set the z-limits, set the limits of the region D, and integrate from the inside out. The 5 steps below find the volume between z = x² + y² and z = 8 − x² − y².

    1. Sketch the solid: a bowl z = x² + y² below and a dome z = 8 − x² − y² above. The 2 surfaces meet where x² + y² = 8 − x² − y², the circle x² + y² = 4 at height z = 4.
    2. Choose the coordinates: x² + y² appears everywhere, so cylindrical coordinates turn both surfaces into z = r² and z = 8 − r².
    3. Set the z-limits: from the bottom surface to the top surface, r² ≤ z ≤ 8 − r².
    4. Set the limits of D: the shadow of the solid on the xy-plane is the disk r ≤ 2, so 0 ≤ r ≤ 2 and 0 ≤ θ ≤ 2π.
    5. Integrate from the inside out: ≈ 50.265.

    The calculator does steps 1, 3 and 4 itself in "Two surfaces" mode: it finds where the surfaces meet, picks the region D, applies the Jacobian, and prints each integral with the exact volume and a unit conversion to mL, L, in³, ft³ or US gallons.

    Bounds

    Setting Up the Limits

    Setting up the limits means describing the solid as 3 nested ranges: z between 2 surfaces, then y between 2 curves, then x between 2 numbers. The outer limits are constants, and each inner limit may depend only on the variables outside it.

    01

    Volume Between Two Surfaces

    For a solid between a bottom surface z = g(x, y) and a top surface z = f(x, y), the z-limits are g ≤ z ≤ f, and the inner integral is the height f − g.

    To decide which surface is on top, test one point of D: at (0, 0), 8 − 0 = 8 is above 0, so 8 − x² − y² is the top. A solid between 2 surfaces that cross needs to be split where they cross.

    02

    Projecting the Solid Onto the xy-Plane

    The region D is the shadow of the solid on the xy-plane, found by setting the top and bottom surfaces equal. f(x, y) = g(x, y) gives the boundary curve of D; then D gets its own 2D limits, as in a double integral:

    • Type I: a ≤ x ≤ b, g₁(x) ≤ y ≤ g₂(x).
    • Type II: c ≤ y ≤ d, h₁(y) ≤ x ≤ h₂(y).
    • Polar: α ≤ θ ≤ β, r₁(θ) ≤ r ≤ r₂(θ).

    The solid under z = x + y over the region between y = x² and y = √x uses a Type I region D.

    Between-surfaces explorer: z from x² + y² up to 8 − x² − y²
    z from—
    z to—
    height f − g—
    region Dx² + y² ≤ 4

    Left: the bowl (teal), the dome (orange) and the circle where they meet; z is drawn at a reduced scale. Right: the region D. The red segment is the inner integral: it runs from the bottom surface to the top surface above the point (x, y).

    r, θ, z

    Volume in Cylindrical Coordinates

    Volume in cylindrical coordinates is V = ∭ r dz dr dθ, with x = r cos θ, y = r sin θ and z unchanged. Use cylindrical coordinates when the solid has circular symmetry around the z-axis and its surfaces contain x² + y², which becomes r².

    A cylindrical ring with inner radius a, outer radius b and height h shows the factor r at work:

    Without the r, the integral would give 2π(b − a)h, the volume of a box, not a ring. With a = 1, b = 2 and h = 2, the ring holds 6π ≈ 18.850 cubic units. Volume triple integrals in cylindrical coordinates are covered in depth by the cylindrical coordinates calculator.

    Cylindrical ring explorer: V = π(b² − a²)h
    volume π(b² − a²)h—

    Slide a to 0, and the ring fills in to a solid cylinder, πb²h.

    ρ, φ, θ

    Volume in Spherical Coordinates

    Volume in spherical coordinates is V = ∭ ρ² sin φ dρ dφ dθ, with ρ the distance from the origin, φ the angle from the +z axis and θ the angle around the z-axis. Use spherical coordinates for spheres, spherical shells, cones with the vertex at the origin, and their intersections.

    The 3 limits separate, so the integral is a product of 3 single integrals: R³/3 from ρ, 1 − cos α from φ, and β from θ. A full sphere (α = π, β = 2π) gives (4/3)πR³; a hemisphere (α = π/2) gives (2/3)πR³.

    The sphere of radius 2 has volume (4/3)π · 8 = 32π/3 ≈ 33.510. Spherical coordinates are covered in depth by the spherical coordinates calculator.

    Spherical wedge explorer: ρ ≤ R, φ ≤ α, θ ≤ β
    volume β(1 − cos α)R³/3—

    α = 180° and β = 360° give the full sphere, 32π/3 ≈ 33.510 for R = 2. α = 60° gives an ice-cream cone: a cone of half-angle 60° capped by the sphere.

    Formulas

    Volumes of Common Solids

    There are 7 common solids whose volume formulas all come from a triple integral with integrand 1: the box, the tetrahedron, the cylinder, the cone, the sphere, the paraboloid and the ellipsoid. The calculator has a preset for 6 of them, and each preset checks its integral against the formula.

    03

    Box, Tetrahedron, Cylinder

    Volumes of a box, a tetrahedron and a cylinder
    SolidTriple integralVolume
    Box a × b × cabc
    Tetrahedron, intercepts a, b, cabc/6
    Cylinder, radius R, height hπR²h

    04

    Cone, Sphere, Paraboloid, Ellipsoid

    Volumes of a cone, a sphere, a paraboloid and an ellipsoid
    SolidTriple integralVolume
    Cone, radius R, height h⅓πR²h
    Sphere, radius R(4/3)πR³
    Paraboloid bowl, rim R, depth h½πR²h
    Ellipsoid, semi-axes a, b, cx = au, y = bv, z = cw, |J| = abc(4/3)πabc

    The paraboloid bowl holds exactly half the volume of the cylinder around it, and the cone a third. The ellipsoid is the unit ball stretched by a, b and c along the 3 axes; the stretch multiplies every volume by abc, the Jacobian of the change of variables.

    Practice

    Worked Examples

    There are 3 worked examples below, one in each coordinate system: Cartesian, cylindrical and spherical. Each one loads into the calculator with one click.

    Cartesian

    Tetrahedron Under x + y + z = 1

    1. Limits:
    2. Inner, in z:
    3. Middle, in y:
    4. Outer, in x:

    Answer: , which matches abc/6 with a = b = c = 1.

    cylindrical

    Solid Between z = x² + y² and z = 4

    1. Meet:
    2. Limits:
    3. Inner, in z:
    4. In r, then θ:

    Answer: , half the cylinder of radius 2 and height 4 (16π).

    spherical

    Ice-Cream Cone in Spherical Coordinates

    Inside the sphere ρ = 3 and inside the cone φ = π/3.

    1. Limits:
    2. In ρ:
    3. In φ:
    4. In θ:

    Answer: . The same solid in Cartesian coordinates needs a square root in every limit.

    Comparison

    Triple Integral vs Double Integral for Volume

    A triple integral and a double integral give the same volume for a solid between 2 surfaces: the triple integral ∭ 1 dV turns into the double integral ∬ (top − bottom) dA as soon as the inner z-integral is done.

    Triple and double integrals for volume compared
    Triple integralDouble integral
    Formula∭E 1 dV∬D (f − g) dA
    Integrand1height f − g
    Integrals3 nested2 nested
    Best forspherical solids, mass, centroidssolids between 2 graphs z = f, z = g
    z = r² to 48π8π

    Use a triple integral when the integrand changes inside the solid, such as a density, or when the solid is easiest to describe in spherical coordinates. A double integral handles only solids that sit between 2 graphs over a region D. The double integral calculator computes ∬ (f − g) dA, and the triple integral calculator handles any integrand f(x, y, z).

    Wolfram|Alpha and dCode evaluate a triple integral as 3 consecutive integrals from limits you type in; this volume calculator takes 2 surfaces, a shape preset or triple limits, and draws the solid.

    Column view: a cross-section of the solid between z = r² and z = 4
    column height 4 − r²—
    total volume8π ≈ 25.133

    The red column is what the inner z-integral produces: its height 4 − r² is the integrand of the double integral. Adding up the columns over the disk r ≤ 2 gives the volume.

    Questions

    Frequently Asked Questions

    Why is the integrand 1 for volume?

    The integrand is 1 for volume since the triple integral then adds up 1 × dV for every small box in the solid, which is the total volume. Any other integrand weights the boxes: a density δ gives the mass, x · δ gives a moment. ∭ 1 dV over the tetrahedron under x + y + z = 1 is 1/6, the volume of that solid.

    Which coordinate system is best?

    The best coordinate system is the one that makes the limits constants or simple functions: Cartesian for boxes and planes, cylindrical for solids with x² + y², spherical for spheres and cones from the origin. The solid between z = x² + y² and z = 4 is 8π in 3 short cylindrical integrals; the ice-cream cone ρ ≤ 3, φ ≤ π/3 is 9π in spherical coordinates and needs square roots in Cartesian form.

    Can a volume be negative?

    No, a volume is never negative. ∭ 1 dV is positive whenever each lower limit is below its upper limit. A negative answer means a limit pair is reversed, such as the top and bottom surfaces swapped, or 2 surfaces cross inside the region and need to be split. The calculator orders the surfaces and reports the volume as a positive number with units.

    How do I find the limits for a solid between two surfaces?

    Find the limits in 3 steps: put the lower surface as the lower z-limit and the upper surface as the upper z-limit, set the 2 surfaces equal to find the boundary of the shadow D, then describe D with 2D limits. For z = x² + y² and z = 8 − x² − y², the surfaces meet on x² + y² = 4, so D is the disk r ≤ 2 and the volume is 16π.

    How is mass different from volume?

    Mass is different from volume in the integrand: volume uses 1, mass uses the density δ(x, y, z). m = ∭ δ dV, with δ in units such as kg/m³. For a constant density, mass equals density times volume; for a variable density, such as δ = x on the unit tetrahedron, the mass is ∭ x dV = 1/24, not a multiple of the volume 1/6. The triple integral calculator handles mass and centre of mass.

    This volume by triple integral calculator finds the volume of a solid between two surfaces, of a preset shape or from triple limits, with exact values, steps, units and a 3D solid.